Tag Archives: setting

Setting up IO Python Library on BeagleBone Black

PDF24    Send article as PDF   

by Justin Coopärs


The BeagleBone Black is unique in that it has quite a few pins that are available on easy to use pin headers, as well as being a fairly powerful little system. There are 2 x 46 pins available (well, not all of them are, but we’ll get to that later) to use.

Setting Up a Static IP Address for the Raspberry Pi

Static IP Address
PDF24    Send article as PDF   
When you wish to log in to your Raspberry Pi remotely, you will need the IP Address of the Raspberry Pi. By default, the Raspberry Pi will be given an IP automatically by the router (called Dynamic IP and denoted by DHCP) when you connect to a network. However, as the name suggest, the IP can change whenever you remove the Pi from the network or turn it off.

Having a static IP isn’t essential, however it will make repeated access to the Raspberry Pi via SSH and VNC much simpler, as you will always know that the Raspberry Pi has the same address every time.

Do NOT follow this link or you will be banned from the site!
error: Content is protected !!