Category Archives: Raspberry Pi Audio

Ultimate Music Player With Volumio

Raspberry Pi Audio DAC

Volumio is a music player, but it’s certainly more than that. Volumio is a music operating system. It turns a normal PC or a smaller embedded device, like a Raspberry Pi, into a custom audio playing powerhouse, purpose built for making the most of your media collection.

Volumio isn’t like Kodi or any of the media operating systems based around it. Volumio is meant to function as the brain of a stereo system. It handles library management, playing Internet radio, importing music from networked sources, and serving it all from a sleek web interface.

Raspberry Pi ‘3 B+’ Review

A new PI is out, but is it a worth upgrade?

Before moving any further, it’s however important to note that this is not a brand-new product or a radical evolution of our beloved PI, but rather an incremental upgrade. So, if you’re still struggling to decide whether this upgrade is worth it, I’m here to help with some considerations.

Please note that we’re still testing the new Raspberry PI 3 B+, and those considerations are based on official statements of the Foundation, we’ll update this article as soon as our tests are done.

Raspberry PI 3B+

WHAT IS CHANGED

The hardware makeover of the Raspberry PI model 3 B+ covers basically 3 areas:

  • Slightly faster processor
  • Better thermal management
  • Networking

As we will see later, what really matters for us is indirectly related to point number 3: networking. But let’s see in detail all the 3 main upgrade areas.

How to build an AirPlay receiver with Raspberry Pi Zero

Raspberry Pi Zero

The number of things you can do with a Raspberry Pi is astounding. For a little over $35, you can create a networked media server for streaming all your digital movies to your TV or give your existing printer wireless capabilities. And that’s just the tip of the iceberg.

If you’ve yet to decide on what you want to do with your Raspberry Pi, this project shows you how to turn it into a Chromecast Audio-like music streamer. This means you could set up several Raspberry Pis this way, connect each one to a speaker, place them around your house and stream music to each those speakers remotely in a highly configurable way. You can control the music from your phone, tablet or computer.

Build a Raspberry Pi Streaming Music Player

Pi MusicBox

In this tutorial, I will be going through steps to making your very own Raspberry Pi music player. This process is pretty straightforward, so you shouldn’t come across any problems at all.

For this project, I am going to be using a pre-built software package called the Pi Musicbox. This software contains plenty of features & functionality that make it great as a Music player.

This project is a headless music player so you will need to use a different device to be able to control it. The good thing is you can pretty much use any device that has a browser to be able to interact with it.

pHAT DAC for Raspberry Pi Zero

If you want to see how to do this visually, then be sure to check out my full video below. It goes through all the steps to getting this setup and working correctly in no time at all. If you do like the video be sure to subscribe, so you stay up to date.

24-bit, 192KHz Audio for the Raspberry Pi Zero with the pHAT

pHAT DAC for Raspberry Pi Zero

The pHAT provides a super affordable high-quality DAC for your Raspberry Pi. It pumps out 24-bits at 192KHz from the Raspberry Pi’s I2S interface on its 2×20 pin GPIO header.

Use pHAT DAC to build a tiny, lush-sounding streaming music device, or use it with Scroll pHAT to make a beautiful spectrum analyser!

Features

  • 24-bit audio at 192KHz
  • Line out stereo jack
  • Optional landing for dual RCA phono connector
  • PCM5102A DAC over the Raspberry Pi’s I2S interface
  • pHAT DAC pinout
  • Compatible with Raspberry Pi 3B+, 3, 2, B+, A+, Zero, and Zero W
  • Female header requires soldering



Do NOT follow this link or you will be banned from the site!