Category Archives: Game Controllers

Using PlayStation3 Controllers with the Raspberry Pi

If you have ever tried to utilize a PlayStation controller with the Raspberry Pi, you may have found it’s not very simple to do. The Raspberry Pi PlayStation controller guide will walk you through the process of setting up and connecting both PlayStation3 controllers and PlayStation4 controllers.
For PlayStation3 (PS3) controllers,I show you how to install the Six-pair Software and utilize it to set up your PS3 controller so it can connect to whatever Bluetooth device you are using on your Raspberry Pi.

In this PS4 controller tutorial we walk you through the process of pairing it with the Raspberry Pi’s Bluetooth and also offer alternative solutions if your controller doesn’t work with the standard Bluetooth stack. You can also set up Xbox controllers on the Raspberry Pi, as well as several other types of game controllers.

Setting up controllers is the perfect way to have your Pi ready to play some games. You might also be interested in using the controllers in other Raspberry Pi projects that make use of a gamepad.

Connecting Wiimote Controllers to the Raspberry Pi

In this Raspberry Pi Wiimote controllers guide, we will walk you through the process of setting up a Wiimote on your Raspberry Pi and show you how to setup both cwiid and wminput.
Utilizing Wiimote controllers on the Raspberry Pi can be painful to deal with due to its handling of the Bluetooth stack. While they run over standard Bluetooth, their actual functionality is not picked up as a conventional joystick device like Xbox controllers and PlayStation controllers.

Instead to support the full functionality of Wiimote controllers in a way that most applications can support we must utilize two pieces of software.

These being cwiid and wminput. One acts as a library that interprets the Wiimotes actions into joystick actions, the other being somewhat of a driver that creates an input device that applications can utilize easily.

Connecting ‘Xbox Controllers’ to the Raspberry Pi

Xbox Controller

If you have ever tried to use an Xbox controller with the Raspberry Pi, you will find very quickly that they do not work correctly right out of the box. In fact to get them working you will be required to install a special driver.

With the newer Xbox One controllers that feature the Bluetooth functionality, you will also find that they will need extra work on top of the driver installation to get them to run. Namely, they are not properly supported by some of the Bluetooth functionality that is switched on by default.

This guide will show you how to get your Xbox Controllers up and running on the Raspberry Pi, while also walking you through how to get the newer Bluetooth enabled controllers to pair successfully on the Pi.

Do NOT follow this link or you will be banned from the site!