Boot Raspberry Pi from a USB Mass Storage Device

boot-multiple-operating-systems-raspberry-pi-with-berryboot
www.pdf24.org    Send article as PDF   
By default, the Raspberry Pi boots from a microSD card. But since the release of the Raspberry Pi 3, new Pis have been able to boot from a USB mass storage device as well. Making that happen is a pretty easy thing to do, and it’s the subject of this how-to.
A word of warning: the new boot mode is in its experimental stage, so it might not work with your USB stick or hard drive. According to the Raspberry Pi Foundation, a couple of non-working examples are the Kingston DataTraveler 100 G3 32 GB and the Verbatim PinStripe 64 GB. The USB compatibility issue will only affect some of us, but the next warning is relevant to us all: setting the boot mode is permanent. With that said, this sounds much scarier than it is: your Pi will still boot preferentially from the microSD card, if one is plugged in.

With those warnings out of the way, let’s move on to the project!

How to boot your Raspberry Pi from a USB mass storage device

Step 1: Install and update Raspbian

We’re going to end this tutorial by booting to Raspbian from a USB drive. But we can’t do that until we enable USB boot mode, and we actually need Raspbian in order to do that. The only way to boot to Raspbian right now is to put it on a microSD card, so, ironically enough, this how-to on booting from USB begins with us booting from a microSD card!

If you don’t have Raspbian installed yet, you can check out the easy guide on how to Install Raspbian on the Raspberry Pi.

After installing Raspbian, let’s install possible updates:

Now that we’re up to date, let’s move on.

Step 2: Enable USB boot mode

Now that we have Raspbian on a microSD card, we can enable the Raspberry Pi’s USB boot mode. First, we’ll have to add a config option, and then we’ll have to reboot the Pi. This will set a bit in the Raspberry Pi’s OTP (One Time Programmable) memory, allowing the device to be booted from a USB mass storage device. After that, we won’t need the SD card anymore.

Enabling USB boot mode is easy. Open Terminal and run the following command:

This adds the config option program_usb_boot_mode=1 to the end of /boot/config.txt. Now let’s reboot the Pi. You can use the PIXEL user interface or enter the sudo reboot command in Terminal.

After the reboot, check that boot mode has been enabled with this command:

The output should contain the value 3020000a.

Tip

If you are going to use your microSD card with a different Raspberry Pi later on, you might want to remove the program_usb_boot_mode=1 line from config.txt, so that the boot mode won’t be programmed to that device as well. You can edit the file using the command sudo nano /boot/config.txt.

Step 3: Prepare your USB mass storage device

This time we are going to install Raspbian on our USB device. The process is similar to installing Raspbian on a microSD card, so you can use the same instructions. Just substitute “microSD card” for “USB device” as you read.

Step 4: Boot your Raspberry Pi from the prepared USB mass storage device

Let’s plug in our prepared USB device and boot. After about 5–10 seconds, the Raspberry Pi should boot normally and you should see its rainbow screen. We’re back in Raspbian, only this time we’ve booted from the USB drive!

Previous Post

Using the 'Google Cloud Vision API' with your Raspberry Pi

What is the 'Google Cloud Vision API'? Google Cloud Vision API enables your robot to understand the content of an image by encapsulating powerful machine learning models in an easy ... Read more

Next Post
boot-multiple-operating-systems-raspberry-pi-with-berryboot

How to Multi-Boot Your Raspberry Pi with "BerryBoot"

If you want to spend less time swapping cards and more time playing with your Raspberry Pi, installing the BerryBoot multi-boot manager makes it dead simple to boot multiple operating ... Read more

Short URL: http://tinyurl.com/ya83lvuc

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.



Do NOT follow this link or you will be banned from the site!