Tag Archives: make

Make a “Safe Shutdown” Button for Raspberry Pi

Shutdown Button
www.pdf24.org    Send article as PDF   

Pulling the power to your Raspberry Pi can cause image corruptions & other issues that can damage your Pi! In this article, we will create a small push button that will work as a ‘Safe-Shutdown’ option. We’ll connect it to our Raspberry Pi using the GPIO pins and some jumper wires, and with a few lines of code, we will have our own power switch!

First, we are going to look at a simple way to wire a button to the Pi GPIO connector. We will then write a python script that will shut down the Pi safely. The final step will be to setup the Pi so that the button will work all the time. Let’s Get started!

My Holonomic Platforms make it into Print

www.pdf24.org    Send article as PDF   
An article featuring my Holonomic Platforms has made it into Print. I was asked by James Bullen from Australian Popular Science Magazine to provide an article back in July.



Do NOT follow this link or you will be banned from the site!