Tag Archives: installing

Installing PixyMon on Linux

PDF24    Send article as PDF   

1. Introduction

The following procedure will walk you through building PixyMon for Linux. This procedure assumes the following:

  • Your system has Linux (Mint-17) installed
  • Pixy firmware has been updated to 1.0.2
  • Your system is connected to the internet

The Mint-17 distribution of Linux can be downloaded here: http://www.linuxmint.com

Installing PixyMon for the CMUcam5 Pixy Camera on a Windows PC

PDF24    Send article as PDF   
I have finally gotten around to purchasing a CMUcam5 PixyCam for myself. The (CMUcam5) PixyCam is a Smart Vision Sensor, with advanced Object Tracking. One advantage of this Camera is that you can quickly “teach” it to locate objects. It saves you time and data flow by only outputting the object data that you’re interested in. A multitude of connection options are available which means you can use PixyCam with almost any microcontroller, including Arduinos, Raspberry Pi, BeagleBone Black and a dedicated LEGO Mindstorms version. I settled for the dedicated LEGO Mindstorms version of the PixyCam which plugs directly into a LEGO Mindstorms NXT or EV3 Sensor Port.

Installing NodeMCU Firmware on the ESP8266 WiFi Module

en.pdf24.org    Send article as PDF   

Why flash your ESP8266 module with NodeMCU?

NodeMCU is a firmware that allows you to program the ESP8266 modules with LUA script. And you’ll find it very similar to the way you program your Arduino. With just a few lines of code you can establish a WiFi connection, control the ESP8266 GPIOs, turning your ESP8266 into a web server and a lot more.

Do NOT follow this link or you will be banned from the site!
error: Content is protected !!