Tag Archives: GPS

Interfacing the Neo-6M GPS Module & Raspberry Pi with LCD Readout

www.pdf24.org    Send article as PDF   

One of the coolest embedded platforms like the Raspberry Pi has given makers and DIYers the ability to get location data easily using GPS module and thus build things that rely on location. With the amount of power packed by the Raspberry Pi, it certainly will be quite awesome to build GPS based projects with the same cheap GPS modules and that is the focus of this post. Today in this project we will Interface GPS module with Raspberry Pi 3.

The goal of this project is to collect location data (longitude and latitude) via UART from a GPS module and display them display on a 16×2 LCD, so if you are not familiar with the way the 16×2 LCD works with the Raspberry Pi, this is another great opportunity to learn.

Installing the Keyestudio Raspberry PI GPS Plate

Keyestudio GPS Plate
www.pdf24.org    Send article as PDF   
This Keyestudio KS0216 Raspberry Pi GPS Plate (shield) features high performance and low power consumption. It utilizes the NEO-6M Module developed by U-blox. The GPS Module is connected through the 2*20 expansion pins of Raspberry Pi. It features a large size ceramic antenna, sending locating information to GPS through the serial port. It can track up to 8 satellites on 50 channels at high speed, and it produces very accurate location data.

Plug the GPS Plate into Raspberry Pi 3. Upload your code to Raspberry Pi 3, and you can find your exact location within a few meters. It also provides you with very accurate time! It can be used in car navigation, personal positioning, fleet management, navigation and so on.

Raspberry PI: Connecting a Neo-6M  GPS Module

Neo-6M GPS Module
www.pdf24.org    Send article as PDF   

I built a project using a Neo-6M  GPS Module with the Raspberry PI. Now there are several USB solutions, and apps that work with them, but I wanted to show how to use a $20 GPS module with a a serial UART, and Python code to decode the NMEA strings. Then you can write your own GPS interface, or combine the data with Google Maps.

Hardware Setup:

The first step is to connect the GPS module to the Raspberry PI. There are only 4 wires involved, so it’s a simple connection.

Do NOT follow this link or you will be banned from the site!