Tag Archives: firmware

Updating the PixyCAM’s Firmware

en.pdf24.org    Send article as PDF   
When it comes to upgrading your PixyCAM to the latest Firmware is idiot proof. The PixyCam uses a ROM-based algorithm to upload new firmware into flash memory over USB, which makes Pixy “unbrickable” – that is, you will always be able to recover the PixyCAM from an unsuccessful firmware upload or a “bad” version of firmware.

EV3 Brick Firmware Update Process Fails

EV3-Update-Failure
www.pdf24.org    Send article as PDF   

What to do if your EV3 Brick stops working during the firmware update process.

If for some reason your EV3 Brick stops working during the firmware update process, you will need to manually update the firmware by doing the following (the EV3 Brick still needs a USB connection to your computer and the EV3 Software Running on you Computer):

Installing NodeMCU Firmware on the ESP8266 WiFi Module

ESP8266
PDF24    Send article as PDF   

Why flash your ESP8266 module with NodeMCU?

NodeMCU is a firmware that allows you to program the ESP8266 modules with LUA script. And you’ll find it very similar to the way you program your Arduino. With just a few lines of code you can establish a WiFi connection, control the ESP8266 GPIOs, turning your ESP8266 into a web server and a lot more.

Restore or Upgrade Mindsensor NXTCam Firmware

PDF24    Send article as PDF   
After receiving my NXTCam a couple of days ago, I experimented with it for an hour or so initially before turning in for the night. The next morning, I found my NXTCam‘s Firmware didn’t like being woken from it’s slumber! I found Deepak Patil of Mindsensors extremely helpful in getting me pointed in the right direction initially when I had issues with my NXTCam v3.0. My panicked emails were responded too very efficiently despite a time zone difference of 12+ hours.



Do NOT follow this link or you will be banned from the site!
error: Content is protected !!