Getting Two ESP8266 WiFi Modules Communicating

esp-client-vs-server
PDF24    Send article as PDF   

In this project we’re going to make two ESP8266 talk with each other.

How it works? We’re going to set one ESP as an Access Point (Server) and another ESP as a Station (Client). Then they’ll establish a wireless communication and the Client sends a message to the Server saying “Hello World!”.

Before continue reading this project, please complete the following tutorials:

If you like the ESP and you want to do more projects you can read my eBook Home Automation using ESP8266 here. Let’s get started!

Parts List

Here’s the hardware that you need to complete this project:

Schematics (3.3V FTDI Programmer)

The schematics for this project are very straight forward. You only need to establish a serial communication between your FTDI programmer and your ESP8266 to upload some code. (Repeat the schematics below for the Client and Server).

Downloading ESPlorer

I recommend using the ESPlorer program created by 4refr0nt to create and save Lua files into your ESP8266.

Follow these instructions to download and install ESPlorer:

  1. Click here to download ESPlorer
  2. Unzip that folder
  3. Go to the main folder
  4. Run ESPlorer.jar. It’s a JAVA program, so you need JAVA installed on your computer
  5. Open the ESPlorer

esplorer start

Writing Your Server Script

Don’t forget that first you need to flash both your ESPs with NodeMCU firmare. Copy and paste the code below into ESPlorer.

Summary: The ESP Server acts as an Access Point and it has its own SSID=test and Password=12345678. The server is continuously listening for a connection, when it successfully establishes a connection and receives a message prints that string on the serial monitor.

Uploading Your Lua Script

When you open the ESPlorer you should see a window similar to the preceding Figure, follow these instructions to send commands to your ESP8266:

1) Connect your FTDI programmer to your computer

2) Set bad raute as 9600

3) Select your FTDI programmer port (COM3, for example)

4) Press Open/Close

5) Select NodeMCU+MicroPtyhon tab

6) Copy the your Lua script into ESPlorer

Then you simply click the button Save to ESP and save your file with the name “init.lua”. Everything that you need to worry about or change is highlighted in red box in the following Figure. esplorer

Writing Your Client Script

Having your ESP flashed with NodeMCU. Copy and paste the code below into ESPlorer. Summary: The ESP Client acts as a Station and it is continuously looking for an Access Point. When the Client finds the Server establishes a communication and sends a message “Hello World!” every 5 seconds.

Note: To upload the Client Script code follow the preceding heading called “Uploading Your Lua Script”.

Demonstration

In this project the Client is sending a message “Hello World!” to the Server via wireless. Here’s what you should see in your serial terminal windows (see Figure below).

data received esp8266

Note: On the left window, I’m using the ESPlorer Output Window . On the right window, I’m establishing a serial communication with PuTTY.org.

Previous Post
ESP8266

Installing NodeMCU Firmware on the ESP8266 WiFi Module

Why flash your ESP8266 module with NodeMCU? NodeMCU is a firmware that allows you to program the ESP8266 modules with LUA script. And you’ll find it very similar to the way ... Read more

Next Post

Secure Access using MFRC522 RFID Reader with Arduino

This Article shows a simple example on how to use the MFRC522 RFID reader, with a quick overview of the specifications, and a demonstration project using an Arduino. Description RFID ... Read more

Short URL: http://tinyurl.com/zcf7bvt

Leave a Reply

Your email address will not be published. Required fields are marked *



Do NOT follow this link or you will be banned from the site!
error: Content is protected !!