Tag Archives: board

How to Install the ESP8266 Board into the Arduino IDE

PDF24    Send article as PDF   
There are a variety of development environments that can be used to program the ESP8266. The ESP8266 community created an add-on for the Arduino IDE that allows you to program the ESP8266 using the Arduino IDE and its programming language.

Introducing the ‘ARMinARM’ board for the Pi Family

ARMin
en.pdf24.org    Send article as PDF   
The ARMinARM board is an STM32 ARM Cortex-M3 microcontroller add-on board for the Raspberry Pi Model B+ with a focus on flexibility and hackability, while still being easy to use. The STM32 runs on 72MHz and has 512KB Flash and 64KB SRAM memory.

Waveshare DVK512 Expansion Board for Raspberry Pi B+

 Waveshare DVK512
PDF24    Send article as PDF   
Whilst searching DX.com, I came across the Waveshare DVK512 Expansion Board suitable for both Raspberry Pi B+ and Banana Pro. The Waveshare DVK512 Expansion Board comes equipped is 4x user defined buttons and LEDs, plus interfaces sockets for add-on Modules of almost any type you can think of.

Arduberry Interface Board for the Raspberry Pi

Arduberry
www.pdf24.org    Send article as PDF   
The staff at Dexter Industries have busy developing an interface between the Raspberry Pi, and the world of Arduino called the Arduberry. The Arduberry allows the mating of Arduino shields too the Raspberry Pi with a simple, inexpensive hardware interface. Slide the Arduberry onto your Pi, fit a Arduino Shield, copy your Arduino code across, and hit the go button.

Opto-pi: Raspberry Pi Opto-Isolator Board

PDF24    Send article as PDF   
I have just backed this project on Kickstarter, and feel that if you are a Raspberry Pi owners looking to use higher voltages with your mini PC, then you might be interested in this new opto-isolator board called the Opto-pi which has been specifically designed to be used with the awesome Raspberry Pi mini PC.

Raspberry Pi Camera Board with CS Mount Lens

RasPi CSI Camera
en.pdf24.org    Send article as PDF   

Fully Compatible with Official Camera Module.

In order to meet the increasing need of Raspberry Pi compatible camera modules. The ArduCAM Group have released a add-on camera module for Raspberry Pi which is fully compatible with official one. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data. The camera is supported in the latest version of Raspbian, Raspberry Pi’s preferred operating system.



Do NOT follow this link or you will be banned from the site!
error: Content is protected !!