Tag Archives: beaglebone

Programming the BeagleBone Black with Python

PDF24    Send article as PDF   

Building a surveillance system with a PIR sensor, the BeagleBone Black and Python.

The BeagleBone Black is an outstanding tool for projects that involve the Internet. Access is easy (simply connect it to the router through an Ethernet cable ), and both Python and JavaScript feature libraries that greatly simplifies matters.

Programming with BoneScript on the BeagleBone Black

PDF24    Send article as PDF   

This Article introduces BoneScript, a Node.js library containing functions specially created for the BeagleBone Black. This library simplifies the process of accessing and configuring the pins of your BeagleBone Black.

Controlling an output, reading a button/sensor, controlling a motor are quite easy with BoneScript. If you used an Arduino before, you’ll find most functions very similar.

Install Cloud9 IDE on the BeagleBone Black

www.pdf24.org    Send article as PDF   

The Cloud9 IDE is an open-source web based programming platform that supports several programming languages.

This great piece of software comes installed on your BeagleBone Black by default. And in our opinion this is one of the key features that makes the BBB a great programming board (the Raspberry Pi lacks a good IDE).

Getting Started with the BeagleBone ‘Black’

en.pdf24.org    Send article as PDF   

This Article was written by Rui Santos and Luís Perestrelo authors of BeagleBone For Dummies.

Introduction

BeagleBone BlackThe BeagleBone Black is a low-cost embedded Linux computer that has found love in the workbenches of many hobbyists, engineers and developers. Operating at 1GHz, providing the possibility to have lots of memory (thanks to its microSD card slot) and access to the Internet, this tiny board is a quite powerful computer on its own. (It also looks great. Something about those rounded edges, probably) Its niche, however, is probably the fact that it features an absurd amount of input and output pins, along with several interfaces that allow different devices to be connected and different communication protocols to be used (you can see a list of those by the end of this post). This bridges the gap between the realms of computing and electronics, allowing to create complex and ambitious electronic projects — often interacting with the Web — while experiencing little to none software or hardware constraints.

Setting up IO Python Library on BeagleBone Black

PDF24    Send article as PDF   

by Justin Coopärs

Overview

The BeagleBone Black is unique in that it has quite a few pins that are available on easy to use pin headers, as well as being a fairly powerful little system. There are 2 x 46 pins available (well, not all of them are, but we’ll get to that later) to use.

Full Review of the BeagleBone ‘EVB’ for Mindstorms EV3

BeagleBone EVB Cube Solver
PDF24    Send article as PDF   
The EVB is a shield (or called cape) for Beaglebone ‘Black’ (BBB). It fully support LEGO® MINDSTORMS® EV3 system, with both the hardware and software! The BeagleBone ‘EVB’ is compatible with all LEGO® sensors just like the EV3 Brick. 100% compatible! It allows the EV3 Virtual Machine (VM) to be run on the Beaglebone ‘Black’.



Do NOT follow this link or you will be banned from the site!
error: Content is protected !!