Monthly Archives: March 2016

Using the HC-SR04 Ultrasonic Sensor with Arduino

HC-SR04
PDF24    Send article as PDF   
The working principle of an ultrasonic sensor is simple and use high-frequency sound waves that are evaluated when the sensor received back the waves. To determine the distance between the robot and object, the sensor measure the elapsed time between sending and receiving the waves.

Using Flask to Control Raspberry Pi GPIOs

PDF24 Tools    Send article as PDF   
With this project you can create a standalone web server with a Raspberry Pi that can toggle two LEDs. You can replace those LEDs with any output (like a relay or a transistor). In order to create the web server you will be using a Python microframework called Flask.

Parts Required

Here’s the hardware that you need to complete this project:

  • Raspberry Pi (any Pi should work, I recommend using Raspberry Pi 3) – view on eBay
  • SD Card (minimum size 8Gb and class 10) – view on eBay
  • Micro USB Power Supply – view on eBay
  • Ethernet cable or WiFi dongle
  • Breaboard – view on eBay
  • 2x LEDs
  • 2x 470Ω Resistors
  • Jumper wires



Do NOT follow this link or you will be banned from the site!